All Categories


Home > Showlist

drill hose

There are a few things you need to be aware of before you start using a drill hose or any other type of water hose for a construction project. Here are a few examples.


The Rutford Ice Stream project team tried to gain access to the ice stream's bed in 2004u20132005. For this, a hot water drill system was necessary. To avoid the washout of sediments, a technique for monitoring the water level in the borehole was also required.

Water was brought back to the surface for use in the drill system as part of this project using a subsurface water recovery system. The system used an instrumented manifold to keep track of the borehole's water level, drill hose pressure, water well drill pipe, and main water supply. In order to supply water to the spray block, it also included a hot water pump that kept the temperature of the hot water between 60 and 65 degrees Celsius.

Why choose CGE Group Wuxi Drilling Tools drill hose?

Related product categories

Inspection on site

For safety and productivity, maintaining drilling equipment in good operating order is crucial. By doing routine drill hose inspections, this can be achieved. You can get a good picture of the state of your drilling equipment and avert severe problems by performing a thorough check.

There are a few things you should check when inspecting your drill hose. You should inspect your hose for delamination, cracks, dents, tears, bulges, and cracks. The usable life of your hose will be shortened by these flaws. Additionally, make sure the hose's exterior cover is intact.

Class 2 or

Typical drill hose is constructed from piping with a thin aluminum alloy wall. It is made of a highly sturdy material and can be used again in good shape. It comes in a wide range of sizes.

After each use, used drill pipe is inspected to determine its physical state. Each item has a color band to identify its class. For instance, a white band indicates a maximum body wall loss of 12% for the pipe. A yellow band indicates a maximum bodywall loss of 15% for the pipe. More than 30% body wall loss is indicated by a red band.

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Hot categories